9Ten11&12, Cooler Fan/Case. Works with GoPro HERO9, HERO10, HERO11, HERO12, Reduce Overheating in Static Environments at Sporting Events, Vlogging, Dash or Airplanes Cams… (White, Variable Speed Fan)

Price: $55.95
(as of Jul 25, 2024 01:01:37 UTC – Details)

The CAMCooLER 9Ten11&12 is designed as an active cooling fan solution. Works with GoPro HERO9 Black, HERO10 Black, HERO 11 Black, and HERO12 Black camera overheating issues when used in a static environment.

Variable Speed Fan. USB speed controller included! It’s identical to the constant speed fan, but it includes a convenient USB speed controller.

Whether you find yourself in a cozy studio environment or basking under the scorching sun at your next event, this fan has got you covered. With the ability to lower the fan speed, we have successfully minimized the noise output, ensuring a tranquil atmosphere for your studio endeavors while still helping to prevent your camera from overheating.

Equipped with an included user-friendly controller, our variable fan offers a wide range of rpm options, ranging from a gentle 2200 rpm to an impressive 6500 rpm. While it is highly improbable that you will ever require speeds exceeding 5000 RPMs, we believe in providing you with the flexibility to adjust the output according to your preferences without compromising the electrical integrity of the fan.

Embrace the power of choice and experience the perfect balance between cooling efficiency and noise reduction with our variable rpm fan. If the variable controller is unnecessary for every event, set it aside and connect the fan directly to the USB plug for a constant 5000 rpm fan.

The Cooler is fully compatible with the Pro 3.5mm Mic Adapter from GoPro. We recommend using an external microphone, so the fan noise doesn’t overwhelm the camera’s internal microphone. IP65-rated fans are waterproof against jets of water, but they are not rated for direct submersion in water.

Warning: Please be aware that the cooling fan assembly may cause cosmetic marking, marring, and or light scratching to your GoPro case with repeated use. This is cosmetic and doesn’t impact the function of the camera. However, do not use our product if this concerns you. The cooling fans will suck in dust and coat the camera with a fine layer of dust, especially when players slide into Homeplate. It is highly recommended to have a battery door that has a passthrough for the power cable. This helps prevent dust migration into the GoPro camera. DO NOT stick your fingers or anything else in the fan blades at any time. Install the cooler over your device first and secure it using the method described in the instructions before applying power. Ensure your fingers and electrical cords are clear of the blades before applying power.

Sustaining 5.3K recording for extended periods above 100°F is likely NOT feasible. Conversely, 4K at 99°F or 1080P at 115°F is highly effective. As a general guideline: Lower recording resolutions are advised for higher ambient temperatures!

Utilizing our cooler fan can effectively lower the operating temperatures of your devices, enabling continuous recording or operation in several scenarios. However, it’s important to note that CAMCOOLERLLC offers no guarantee and will not be held liable for any lost recorded video footage or device malfunctions resulting from overheating.

In summary, it’s essential to monitor operating conditions, adjust recording resolutions and settings based on environmental temperatures accordingly to ensure optimal performance and mitigate potential overheating issues.
Compatible with GoPro HERO9 Black, HERO10 Black, HERO11 Black, HERO12 Black action cameras. Helps reduce camera overheating!
Action cameras are prone to overheating within 25 minutes without a cooling fan.
Record 4k, 60 fps in direct sunlight at 99°F. (User results may vary)
Record 1080P, 60 fps in direct sunlight at 115°F. (User results may vary)
As a general guideline: Lower recording resolutions are advised for higher ambient temperatures! Sustaining 5.3K recording for extended periods above 100°F is likely not feasible. Conversely, 1080P at 115°F is highly effective.
The Variable RPM cooling fan operates between 2200 to 6500 RPMs. Ambient fan noise is approximately 45 dBA at 2200 RPM.
Manufactured in the USA by a small business utilizing Fused Deposition Modeling (FDM) equipment. Over 4 years of testing and use in Arizona’s scorching hot summers!
High quality Dual Ball Bearing, IP65-rated fan. (fan is made in China)